ONLINE AUCTION SALE DUE TO RELOCATION
Auction details
| Sales Starts | 1 Jul 2015 @ 09:00 |
|---|---|
| Sales Ends | 16 Jul 2015 @ 15:00 |
Description
ON INSTRUCTIONS RECEIVED DUE TO RELOCATION
ONLINE AUCTION SALE
HOERBIGER UK LIMITED
EDDERTHORPE STREET
BRADFORD
WEST YORKSHIRE
BD3 9RA
ENGLAND
AUCTION CLOSES ON THE 16th JULY, 2015 from 3pm
VIEWING ON SITE : 13th JULY, 2015 between 10am – 3.30pm
PERSONAL PROTECTION EQUIPMENT TO BE WORN (PPE)
Available Lots
Lots 1-25 of 326
Lot 1: WEBSTER & BENNETT 36" M Type Fixed Rail Vertical Boring Machine with Screwcutting and Newall Digital Readout
Table dia. 36". Maximum swing 48". Height under DRO Scale (Rail) 21". Table speeds 10.5-234 rpm. Feeds 0.005"-0.250" per/rev. Newall Topaz 2 Axis Digital Readout. Screwcutting.Chuck Jaws. Main Motor 15 HP. Lo Volt Light. 4 Tool holders fitted on turret. ...
Lot 2: STARTRITE Model BS540/LL Vertical Bandsaw
Table size 720mm x 520mm. Throat depth 500mm. Blade length 4250mm. 400 Volts. 3 Phase. Serial No. L10070492. Year 2010
Lot 3: BRIDGEPORT JB Turret Milling Machine
Table size 48" x 9". Spindle speeds 67-4600 rpm. Spindle taper R8. Power Longitudinal Feed. Fitted with 8" dia. Indexing Attachment. Serial No. 2295203765
Lot 4: TOM SENIOR Horizontal Milling Machine
Table size 25" x 6.1/4". Spindle speeds 50-1660 Rpm. Fitted with Indexing Attachment. Arbor.
Lot 5: HARRISON M400 Straight Bed Centre Lathe with Anilam 2 Axis Digital Readout
Spindle speeds 40-2000 rpm. 40" Between centres. Fitted with 10" dia 3 jaw chuck. 4 jaw chuck. Spindle bore 2.5/8". 4 way toolpost. Quick change rear toolpost. Toolholders. Coolant pump/tank.
Lot 6: COLCHESTER Triumph 2000 Straight Bed Centre Lathe
Spindle speeds 20-2000 rpm. Distance between centres 30". 4 Way toolpost. Fitted with 10" dia 3 jaw chuck. Lo Volt light. Serial No. LTR30 SMRJH/37486
Lot 7: WHITEHEAD Junior Type BJ Vertical Bandsaw on Steel Bench
Tablre size 16" x 16". Throat depth 11.1/2". Serial No. 5995. Fitted on steel bench 48" x 20" x 30" high
Lot 8: TOM SENIOR Horizontal Milling Machine
Table size 25" x 6.1/4". Spindle speeds 50-1660 rpm. Powered feed to table. Arbor. Fitted with indexing attachment
Lot 9: FOBCO 1/2" Capacity Bench Drilling Machine
Table size 8.1/2" x 8.1/2". Serial No. 13299. Fitted with Jacobs Chuck. 3 Phase.
Lot 15: KUMMER K20 Twin Spindle Lathe with Toolsetter & Control Cabinet
KUMMER K20 Twin Spindle Lathe with Toolsetter & Control Cabinet.
Tooling cabinet with accessories photographed.
Lot 16: BRIDGEPORT Series I 2HP Turret Milling Machine with Heidenhain 2 Axis Digital Readout
Table size 42" x 9". Spindle speeds 60-4600 rpm. Spiundle taper R8. Power Longitudinal Feed. Heidenhain 2 Axis Digital Readout. Serial No. 244191176T
Lot 17: ESTA Dustomat - 47 Dust Extraction System. Year 2009
Serial No. 090000129. Year 2009. Motor power 3KW. Capacity 1.330 cubic metres/h
Lot 18: HARDINGE VMC800II Vertical Machining Centre with Troyke DL-9-B 4th Axis Attachment. Year 2001
Table size 924mm x 508mm. X/Y/Z Travel 800mm/508mm/508mm. Spindle taper 40 Int. 20 ATC. Spindle speeds 10,000 rpm. Spindle power 17.3 HP. Linear Ways. Hardinge/Fanuc Control System II. Serial No. NVBA1H0028. Year 2001.
Lot 19: LODIGE L20 Compound Mixing Machine. Year 2006
Serial No. 15775. Year 2006. Fitted on steel bench 1000mm x 900mm x 760mm high.
Lot 20: MORTON Type FM130D1MZ Compound Mixing Machine. Year 1996.
Serial No. M24120. Year 1996. Design pressure 6.6 Bar. Test pressure 9.9 Bar. Design temperature 162 degrees C. Standard BS 5500. Machine with steel steps.
Lot 23: ESTA Dustomat - 67 Dust Extraction Unit. Year 2008
Serial No. 08002413. Year 2008. Motor power 3KW. Amps 6. V Max 1.850 cubic metres/h. Weight 220 kgs
